Chapter 4 Maintenance, Troubleshooting & Hardware Replacement
Page 4 - 14 |
| Enclosure Top Cover Removal |
Enclosure Top
Cover
Removal
1.Power down the array.
2.Remove AC power cord.
3.Unlock and open front cover of enclosure (see the figure below).
4.Remove the screws in the enclosure’s front surface that secure the top cover to the enclosure.
5.Lift the front of the top cover.
6.Slide the top cover toward the rear of the enclosure to disengage the cover’s hooks from their slots.
7.Lift top cover from enclosure.
Replacement Reverse the steps above.
Figure 18 Top Cover Removal
21020690 B | 6500 Disk Array User’s Guide |
