1-58
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Chapter 1 Shelf and Backplane Hardware
1.12.1 Wire-Wrap and Pin Connections
Figure 1-37 AEP Wire-Wrap Connections to Backplane Pins
Table 1-24 shows the backplane pin assignments and corresponding signals on the AIC-I and AEP.
Figure 1-38 is a circuit diagram of the alarm inputs (Inputs 1 and 32 are shown in the example).
Table 1-24 Pin Assignments for the AEP
AEP Cable Wire Backplane Pin AIC-I Signal AEP Signal
Black A1 GND AEP_GND
White A2 AE_+5 AEP_+5
Slate A3 VBAT– VBAT–
Violet A 4 VB+ VB +
Blue A5 AE_CLK_P AE_CLK_P
Green A6 AE_CLK_N AE_CLK_N
Yellow A7 AE_DIN_P AE_DOUT_P
Orange A8 AE_DIN_N AE_DOUT_N
Red A9 AE_DOUT_P AE_DIN_P
Brown A1 0 AE_DOUT_N AE_DIN_N