Cisco Systems 15454-FTF2 A.6.14 OC192 IR/STM64 SH 1550 Card Specifications

A-40
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Appendix A Hardware Specifications
A.6.14 OC192 IR/STM64 SH 1550 Card Specifications
– Maximum receiver level: –1 dBm at BER 1 * 10 exp – 12
– Minimum receiver level: –11 dBm at BER 1 * 10 exp – 12
– Receiver: PIN diode
– Link loss budget: 5 dB minimum, plus 1 dB dispersion penalty
at BER = 1 * 10 exp – 12 including dispersion
– Receiver input wavelength range: 1290 to 1330 nm
– Dispersion tolerance: 6.6 ps/nm
• Environmental
– Operating temperature: +23 to +131 degrees Fahrenheit (–5 to +55 degrees Celsius)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 47.00 W, 0.98 A at –48 V, 160.5 BTU/hr
• Dimensions
– Height: 12.650 in. (321.3 mm)
– Width: 0.716 in. (18.2 mm)
– Depth: 9.000 in. (228.6 mm)
– Depth with backplane connector: 9.250 in. (235 mm)
– Weight not including clam shell: 3.1 lb (1.3 kg)
A.6.14 OC192 IR/STM64 SH 1550 Card Specifications
The OC192 IR/STM64 SH 1550 card has the following specifications:
• Line
– Bit rate: 9.95328 Gbps
– Code: Scrambled NRZ
– Fiber: 1550-nm single-mode
– Maximum chromatic dispersion allowance: 800 ps/nm
– Loopback modes: Terminal and facility
Note You must use a 3 to 15 dB fiber attenuator (5 dB recommended) when working with the
OC192 IR/STM64 SH 1550 card in a loopback. Do not use fiber lo opbacks with the
OC192 IR/STM64 SH 1550 card. Using fiber loopbacks can cause irrepa rable damage to the
OC192 IR/STM64 SH 1550 card.
– Connectors: SC
– Compliance: Telcordia GR-253-CORE, ITU-T G.707, ITU-T G.957, ITU-T G.691
• Transmitter
– Maximum transmitter output power: +2 dBm
– Minimum transmitter output power: –1 dBm
– Center wavelength: 1530 to 1565 nm