2-20
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Chapter 2 Common Control Cards
2.5.1 XC10G Functionality
Figure 2-5 XC10G Faceplate and Block Diagram
2.5.1 XC10G Functionality
The XC10G card manages up to 672 bidirectional VT1.5 ports and 1 152 bidirectional STS-1 ports. The
TCC2/TCC2P cards assign bandwidth to each slot on a per STS-1 or per VT1.5 basis.
Two cross-connect cards, installed in Slots 8 and 10, are required to operate the ONS 15454. You can
establish cross-connect (circuit) information through the CTC. The cross-connect card establishes the
proper internal cross-connect information and sends the setup information to the cross-co nnect card.
The XC10G card provides:
1152 STS bidirectional ports
576 STS bidirectional cross-connects
672 VT1.5 ports via 24 logical STS ports
336 VT1.5 bidirectional cross-connects
Nonblocking at STS level
STS-1/3c/6c/12c/48c/192c cross-connects
Line 1
Line 2
Line 3
Line 4
Span 1
Span 2
Span 3
Span 4
Line 5
Line 6
Line 7
Line 8
Cross-Connect
Main SCL
Protect
SCL
Ref Clk A
Ref Clk B
TCCA
ASIC
SCL Link
uP
VT
Cross-Connect
Matrix
uP Interface
uP Interface
Matrix
FLASH
RAM
B
a
c
k
p
l
a
n
e
61342
FAIL
ACT/STBY
XC10G