Cisco Systems 15454-FTF2 15.5.2 DS1/E1-56 Card Performance Monitoring Parameters

15-14
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Chapter 15 Performance Monitoring
15.5.2 DS1/E1-56 Card Performance Monitoring Parameters
Note If the CV-L(NE and FE) falls in the range 51-61 for EC1,then, the user might see discrepancy in the SES
and the UAS-L values. However, ES-L will be in the nearest accuracy. For a few seconds , in a given 10
seconds interval, the number of CV-L counted may not cross the CV count criteria for SES, (due to
system/application limitation for the below mentioned ranges); as a consequence of which there ma y not
be 10 continuous SES, thus UAS will not be observed.
15.5.2 DS1/E1-56 Card Performance Monitoring Parameters
Figure 15-4 shows signal types that support near-end and far-end PMs.
Figure 15-4 Monitored Signal Types for the DS1/E1-56 Card
Figure 15-5 shows where overhead bytes detected on the ASICs produce PM parameters for the
DS1/E1-56 card.
78981
ONS 15454
PTE
EC1 OC48
Fiber
EC1 Signal
EC1 Path (EC1 XX) PMs Near and Far End Supported
EC1 Signal
ONS 15454
EC1OC48
STS Path (STS XX-P) PMs Near and Far End Supported
PTE