Cisco Systems 15454-FTF2

C-101

Cisco ONS 15454 Reference Manual, R8.5.x

78-18106-01

Appendix C Network Element Defaults

C.3 Node Default Settings

• Security Policy settings—Set the allowable failed logins before lockout, idle user timeo ut for each

user level, optional lockout duration or manual unlock enabled, password reuse and change

frequency policies, number of characters difference that is required between the old and new

password, password aging by security level, enforced single concurrent session per user, and option

to disable inactive user after a set inactivity period.

• Security Password settings—Set when passwords can be changed, how many characters they must

differ by, whether or not password reuse is allowed, and whether a password change is required on

first login to a new account; set password aging enforcement and user-level specific aging and

warning periods; set how many consecutive identical characters are allowed in a password,

maximum password length, minimum password length, minimum number and combination of

nonalphabetical characters required, and whether or not to allow a password that is a reversal of the

• BITS Timing settings—Set the AIS threshold, Admin synchronization status messaging (SSM),

coding, facility type, framing, state, and line build-out (LBO) settings for building integrated timing

supply 1 (BITS-1) and BITS2 timing.

• General Timing settings—Set the mode (External, Line, or Mixed), quality of reserved (RES) timing

(the rule that defines the order of clock quality from lowest to highest ), revertive, reversion time,

and SSM message set for node timing.

Note Any node level defaults changed using the Provisioning > Defaults tab, changes existing node level

provisioning. Although this is service affecting, it depends on the type of defa ults changed, for example,

general, and all timing and security attributes. The “Changing default values for some node level

attributes overrides the current provisioning.” message is displayed. The Side Effects column of the

Defaults editor (right-click a column header and select Show Column > Side Effects) explains the effect

of changing the default values. However, when the card level defaults are changed using the

Provisioning > Defaults tab, existing card provisioning remains unaffected.

Note For more information about each individual node setting, refer to the “Change Node Settings” chapter

of the Cisco ONS 15454 Procedure Guide.

Table C-21 Node Default Settings

Default Name Default Value Default Domain

NODE.circuits.SendPDIP TRUE TRUE, FALSE

NODE.circuits.State IS,AINS IS, OOS,DSBLD,

OOS,MT,

IS,AINS

NODE.circuits.pathprotection.AllowpathprotectionOverOnePlusOne FALSE TRUE, FALSE

NODE.circuits.pathprotection.ProvisionWorkingGoAndReturnOnPrimaryPath TRUE TRUE, FALSE

NODE.circuits.pathprotection.ReversionTime 5.0 (minutes) 0.5, 1.0, 1.5 ..

12.0

NODE.circuits.pathprotection.Revertive FALSE TRUE, FALSE

NODE.circuits.pathprotection.STS_SDBER 1.00E-06 1E-5, 1E-6, 1E-7,

1E-8, 1E-9

NODE.circuits.pathprotection.STS_SFBER 1.00E-04 1E-3, 1E-4, 1E-5