Cisco Systems 815 manual Assembling Stacking Clip and Fastener

Chapter 2 Installation

Optional Installation Procedures

Figure 2-5 Assembling Stacking Clip and Fastener

Push plastic fastener

through small hole at the end of the stacking clip.

H11542

After assembling the clip and fastener, follow these steps to stack the router with another device:

Step 1 Place the clip on top of the lower device, as shown in Figure 2-6. Slide the clip forward so that the front tabs slide into the vent slots. Make sure that the back hooks fit over the edge of the lower device.

	Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01		2-11