Cisco Systems 815 manual Closing the Chassis

Appendix C Installing and Upgrading Memory and Virtual Private Network Modules

Closing the Chassis

Closing the Chassis

After installing memory or a VPN module on the motherboard, attach the router cover by following these steps:

Step 1 If you disconnected the fan from the motherboard in the “Opening the Chassis” procedure, reconnect the fan cable to the connector labeled FAN on the motherboard.

Step 2 Locate the posts that protrude from the inside of the chassis cover, and locate the corresponding openings on the chassis bottom.

Step 3 Line up the posts with the corresponding openings, as shown in Figure C-8, and carefully slide the posts into the openings, taking care not to damage the router motherboard with the posts.

	Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01		C-13