Cisco Systems 815 manual Recovering a Lost Password, Determining the Configuration Register Value

Chapter 3 Troubleshooting

Recovering a Lost Password

Recovering a Lost Password

This section describes how to recover a lost enable password and how to enter a new enable secret password.

Password recovery consists of the following major processes:

•Determining the Configuration Register Value

With this process, you determine the configuration of the router, so that you may restore the configuration after the password is recovered.

•Resetting the Router

With this process, you reconfigure the router to its initial startup configuration. You then display the enable password, if one is used.

•Resetting the Password

If you are using an enable secret password, you enter a new password with this process. You then restore the router to its previous configuration.

•Resetting the Configuration Register Value

If you are using an enable password, you use this process to restore the router to its previous configuration.

Note See the “Hot Tips” section on Cisco.com for additional information on replacing enable secret passwords.

Determining the Configuration Register Value

Follow these steps to determine the configuration register value:

Step 1 Connect an ASCII terminal or a PC that is running a terminal-emulation program to the console port on the router. See the “Connecting a PC” section in Chapter 2, “Installation.”

Step 2 Configure the terminal to operate at 9600 baud, 8 data bits, no parity, 1 stop bit and no flow control.

Step 3 Reboot the router by pressing the power switch to the off ( 0 ) position and then to the on ( ) position.

	Cisco 815 Integrated Services Router Hardware Installation Guide
3-2	OL-9558-01