Cisco Systems manual Configuration register is 0x2102 815#

Chapter 3 Troubleshooting

Recovering a Lost Password

Step 4 At the user EXEC prompt (Router>), enter the show version command to display the existing configuration register value (shown at the end of this example output):

815# show version

Cisco IOS Software, C815 Software (C815-IPBASE-M), Version 12.4(5.13.5)PIA5 ENGINEERING WEEKLY BUILD, synced to haw_t_pi4_abu HAW_T_PI4_ABU_5_13_1_PIA4

Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Wed 22-Mar-06 18:07 by ealyon

ROM: System Bootstrap, Version 12.2(20060221:032620) [yiye-after815rmon 101], DEVELOPMENT SOFTWARE

815B uptime is 6 days, 14 hours, 41 minutes

System returned to ROM by reload at 22:59:26 PST Mon Apr 24 2006 System restarted at 23:01:51 PST Mon Apr 24 2006

System image file is "flash:c815-ipbase-mz.124-5.13.5.PIA5"

Cisco 815 (MPC860P) processor (revision 0x500) with 59569K/5967K bytes of memory.

Processor board ID FOC09250KK8 (1061493493), with hardware revision 0000

MPC860P processor: part number 5, mask 2 1 Ethernet interface

5 FastEthernet interfaces

1 Cable Modem interface

32K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102 815#

Step 5 Record the setting of the configuration register.

Step 6 Record the break setting, as given by bit 8 of the configuration register.

•Break enabled—Bit 8 is set to 0.

•Break disabled (default setting)—Bit 8 is set to 1.

	Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01		3-3