Cisco Systems ASR 903 manual Installing the Router Chassis in the Rack

Chapter 3 Installing the Cisco ASR 903 Router

Installing the Router in a Rack

Installing the Router Chassis in the Rack

To install the router chassis in the equipment rack, perform these steps:

Step 1 Position the chassis in the rack as follows:

•If the front of the chassis (front panel) is at the front of the rack, insert the rear of the chassis between the mounting posts.

•If the rear of the chassis is at the front of the rack, insert the front of the chassis between the mounting posts.

Step 2 Align the mounting holes in the bracket (and optional cable guide) with the mounting holes in the equipment rack.

Caution Do not use interface module and power supply ejector handles to lift the chassis; using the handles to lift the chassis can deform or damage the handles.

Figure 3-3 Installing the Chassis in a 19-inch EIA Rack

209248

Figure 3-4 Installing the Chassis to support the Japanese JIS Rack Standard

343345

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-04 3-3