Cisco Systems CP6921CK9 manual IPv4 Setup Menu Options

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

IPv4 Setup Menu Options

IPv4 Setup Menu Options

The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select the IPv4 option on the Network Setup menu.

Table 4-2describes the IPv4 Setup menu options.

For information about the keys you can use to edit options, see the “Editing Values” section on page 4-3.

Table 4-2			IPv4 Setup Menu Options
	Option			Description	To Change
	DHCP			Indicates whether the phone has DHCP enabled or	Scroll to the DHCP option, press the
				disabled.	Edit softkey, then press either theNo
				When DHCP is enabled, the DHCP server assigns the	softkey to disable DHCP, or press the
					Yes softkey to enable DHCP.
				phone an IPaddress. When DHCP is disabled, the
				administrator must manually assign an IP address to the
				phone.
	IP Address			Internet Protocol (IP) address of the phone.	1.	Set the DHCP option to No.
				If you assign an IP address with this option, you must also	2.	Scroll to the IP Address option,
				assign a subnet mask and default router. See the Subnet		press the Edit softkey, and then
				Mask and Default Router options in this table.		enter a new IP Address.
					3.	Press the Apply softkey, then
						press Save.
	Subnet Mask			Subnet mask used by the phone.	1.	Set the DHCP Enabled option to
						No.
					2.	Scroll to the Subnet Mask
						option, press the Edit softkey,
						and then enter a new subnet
						mask.
					3.	Press the Apply softkey, then
						press Save.
	Default Router 1			Default router used by the phone (Default Router 1).	1.	Set the DHCP Enabled option to
						No.
					2.	Scroll to the appropriate Default
						Router option, press the Edit
						softkey, and then enter a new
						router IP address.
					3.	Press the Apply softkey, then
						press Save.
	DNS Server 1			Primary Domain Name System (DNS) server (DNS Server	1.	Set the DHCP Enabled option to
				1) and optional backup DNS servers (DNS Server 2–5)		No.
				used by the phone.	2.	Scroll to the appropriate DNS
						Server option, press the Edit
						softkey, and then enter a new
						DNS server IP address.
					3.	Press the Apply softkey, then
						press Save.
		Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
	4-6					OL-19025-01