Configuring System Time
Defining SNTP Settings
ESW 500 Series Switches Administration Guide 104
•Encryption Key ID — Indicates the Key Identification used to communicate
between the SNTP server and device. The range is 1 - 4294967295.
•Preference — The SNTP server providing SNTP system time information. The
possible field values are:
-
Primary
— The primary server provides SNTP information.
-
Secondary
— The backup server provides SNTP information.
-
In progress
— The SNTP server is currently sending or receiving SNTP
information.
-
Unknown
— The progress of the SNTP information currently being sent
is unknown. For example, the device is currently trying to locate an
interface.
•Status — The operating SNTP server status. The possible field values are:
-
Up
— The SNTP server is currently operating normally.
-
Down
— Indicates that a SNTP server is currently not available. For
example, the SNTP server is currently not connected or is currently
down.
-
Unknown
— Indicates that the device (sntp client) is currently looking for
sntp server.
•Last Response — Indicates the last time a response was received from the
SNTP server.
•Offset — Indicates the difference in minutes between DST and the local
standard time.The default time is 60 minutes.
•Delay — Indicates the amount of time it takes to reach the SNTP server.
STEP 2 Click the Add button. The
Add SNTP Server Page
opens: