Viewing Statistics
Viewing Ethernet Statistics
ESW 500 Series Switches Administration Guide 401
-
60 Sec
— Indicates that the Etherlike statistics are refreshed every 60
seconds.
-
No Refresh
— Indicates that the Etherlike statistics are not refreshed.
•Frame Check Sequence (FCS) Errors — Displays the number of FCS errors
received on the selected interface.
•Single Collision Frames — Displays the number of single collision frames
received on the selected interface.
•Late Collisions — Displays the number of late collision frames received on the
selected interface.
•Excessive Collisions — Displays the number of excessive collision frames
received on the selected interface. (Available on non-gigabit switches only)
•Oversize Packets — Displays the number of oversized packets (over 1518
octets) received on the interface since the page was last refreshed.
•Internal MAC Receive Errors — Displays the number of internal MAC received
errors on the selected interface
•Received Pause Frames — Displays the number of r eceived paused frames on
the selected interface.
•Transmitted Pause Frames — Displays the number of paused frames
transmitted from the selected interface.
Resetting Etherlike Statistics Counters
STEP1 Click Statistics > Ethernet > Etherlike. The
Etherlike Page
opens:
STEP 2 Click the Clear Counters button. The interface statistics counters are cleared.
Viewing GVRP Statistics
The
GVRP Page
contains statistics for GVRP communication on the device.
To view GVRP statistics: