Configuring IP Information
IP Addressing
ESW 500 Series Switches Administration Guide 241
Configuring IP Information
The IP address and default gateway can be either dynamically or statically
configured. In Layer 2, a static IP address is configured on the IPv4 Interface Page.
The Management VLAN is set to VLAN 1 by default, but can be modified.
This section provides information for defining device IP addresses, and includes
the following topics:
•IP Addressing
•Defining DHCP Relay
•Defining DHCP Relay Interfaces
•ARP
•Domain Name System

IP Addressing

The IP address and default gateway can be either dynamically or statically
configured. In Layer 2, a static IP address is configured on the
IPv4 Interface Page
.
The Management VLAN is set to VLAN 1 by default, but can be modified.
The
IPv4 Interface Page
contains fields for assigning IPv4 addresses. Packets are
forwarded to the default IP when frames are sent to a remote network. The
configured IP address must belong to the same IP address subnet of one of the IP
interfaces.