Cisco Systems ESW 500 - page 242

Configuring IP Information
IP Addressing
ESW 500 Series Switches Administration Guide 242
STEP1 Click Monitor & Device Properties > System Management > IP Addressing > IPv4
Interface. The
IPv4 Interface Page opens:
IPv4 Interface Page
The
IPv4 Interface Page contains the following fields:
•Get Dynamic IP from DHCP Server — Retrieves the IP addresses using DHCP.
•Static IP Address — Permanent IP addresses are defined by the administrator.
IP addresses are either configured on the Default VLAN or are user-defined.
•Management VLAN — Sets the management VLAN. The switch uses this VLAN
to watch for management packets from Telnet and web browser management
sessions. Management VLAN is set to 1 or 100 by default.
•IP Address — The currently configured IP address.
•Network Mask — Displays the currently configured IP address mask.
•Prefix Length — Specifies the prefix length. The range is 5 -128 (64 in the case
EUI-64 parameter is used).
•User Defined Default Gateway — Manually defined default gateway IP
address.