Cisco Systems ESW 500 - page 139

Configuring Device Security
Defining Traffic Control
ESW 500 Series Switches Administration Guide 139
STEP1 Click Security > Traf fic Co ntr ol > Storm Control. The Storm Control Page opens:
Storm Control Page
The
Storm Control Page contains the following fields:
•Unknown Unicast Group Control — On ESW 520 devices, sets the
Unknown Unicast Control as the Broadcast Mode globally defined on the
device.
•Rate Threshold — On FE devices, sets the maximum rate (packets per
second) at which unknown packets are forwarded. The range rate is 3500-
100,000 Kbps.
•Copy From Entry Number — Copies the storm control configuration from the
specified table entry.
•To Entry Number(s) — Assigns the copied storm control configuration to the
specified table entry.
•Port — Indicates the port from which storm control is enabled.
•Enable Broadcast Control — Indicates if Broadcast packet types are
forwarded on the specific interface. The possible field values are:
- Enable — Enables Broadcast packet types to be forwarded. This is the
default value.