Cisco Systems ESW 500 manual ,

Configuring Device Security
Defining Dynamic ARP Inspection
ESW 500 Series Switches Administration Guide 208
STEP1 Click Security > ARP Inspection > ARP Inspection List. The ARP Inspection List
Page
opens:
ARP Inspection List Page
The
ARP Inspection List Page contains the following fields:
•ARP Inspection List Name — Pull-down lists name of the Inspection List.
•Delete and Add Buttons — Delete or Add user-defined ARP Inspection Lists.
Static ARP Inspection Table
•IP Address — Specifies IP address included in ARP Binding Lists which is
checked against ARP requests and replies.
•MAC Address — Specifies MAC address included in ARP Binding Lists which
is checked against ARP requests and replies.
NOTE The Binding list cannot be added until an ARP list is added.
STEP 2 Click Add under ARP Inspection List Name. The Add ARP list Page opens: