Configuring Device Security
Defining Dynamic ARP Inspection
ESW 500 Series Switches Administration Guide 203
If the packet’s IP address was not found in the ARP Inspection List, and DHCP
snooping is enabled for a VLAN, a search of the DHCP Snooping Database is
performed. If the IP address is found, the packet is valid and is forwarded.
NOTE ARP inspection is performed only on untrusted interfaces.
The ARP Inspection section contains the following topics:
•Defining ARP Inspection Properties
•Defining ARP Inspection Trusted Interfaces
•Defining ARP Inspection List
•Assigning ARP Inspection VLAN Settings
Defining ARP Inspection Properties
The
ARP Inspection Properties Page
provides parameters for enabling and setting
global Dynamic ARP Inspection parameters, as well as defining ARP Inspection
Log param eters.
To define ARP Inspection properties: