Configuring Device Security
Defining Access Methods
ESW 500 Series Switches Administration Guide 135
-
HTTP
— Assigns HTTP access to the rule. If selected, users accessing
the device using HTTP meeting access profile criteria are permitted or
denied access to the device.
-
Secure HTTP (SSL)
— Assigns HTTPS access to the rule. If selected,
users accessing the device using HTTPS meeting access profile criteria
are permitted or denied access to the device.
-
Secure Telnet (SSH)
— Assigns SSH access to the rule. If selected,
users accessing the device using Telnet meeting access profile criteria
are permitted or denied access to the device.
•Interface — Defines the interface on which the access profile is defined. The
possible field values are:
-
Port
— Specifies the port on which the access profile is defined.
-
EtherChannel
— Specifies the EtherChannel on which the access profile
is defined.
-
VLAN
— Specifies the VLAN on which the access profile is defined.
•Source IP Address — Defines the interface source IP address to which the
access profile applies. The Source IP Address field is valid for a subnetwork.
•Network Mask — Determines what subnet the source IP Address belongs to in
the network.
•Prefix Length — Defines the number of bits that comprise the source IP
address prefix, or the network mask of the source IP address.
•Action — Defines the action attached to the rule. The possible field values are:
-
Permit
— Permits access to the device.
-
Deny
— Denies access to the device. This is the default.
STEP 3 Define the relevant fields.
STEP4 Click Apply. The profile rule is added, and the device is updated.
Modifying Profile Rules
STEP1 Click Security > Access Method > Profile Rules. The
Profile Rules Page
opens:
STEP 2 Click the Edit button. The
Edit Profile Rule Page
opens: