Cisco Systems ESW 500 - page 311

Configuring Quality of Service
Defining General Settings
ESW 500 Series Switches Administration Guide 311
STEP1 Click Quality of Service > General > CoS. The CoS Page opens:
CoS Page
The
CoS Page contains the following fields:
•QoS Mode — Indicates if QoS is enabled on the device. The possible values
are:
- Advanced — Enables Advanced mode QoS on the device.
- Basic — Enables QoS on the device.
- Disable — Disables QoS on the device.
•Ports — Indicates that the CoS configuration of the ports are described in the
page.
•EtherChannels — Indicates that the CoS configuration of the EtherChannels are
described in the page.
•Interface — Indicates the interface for which the CoS information is displayed.
•Default CoS — Displays the default CoS value for incoming packets for which a
VLAN tag is not defined. The possible field values are 0-7. The default CoS is 0.