Cisco Systems ESW 500 - page 372

Configuring SNMP
Managing Cisco Discovery Protocol
ESW 500 Series Switches Administration Guide 372
STEP1 Click Monitor & Device Properties > CDP. The CDP Page opens
STEP 2 Click Details. The CDP Neighbor Details Page opens:
CDP Neighbor Details Page
In addition to the fields in the
CDP Page , the CDP Neighbor Details Page contains
the following additional fields:
•IP Address — Indicates the address TLV advertised by the neighboring port.
•Interface — Indicates the interface type advertised by the neighboring port .
The possible field values are:
- Ethernet — Indicates the neighboring interface is an Ethernet port.
- Fast Ethe rnet — Indicates the neighboring interface is an Fast Ethernet
port.
- Giga Ethernet — Indicates the neighboring interface is an Giga Ethernet
port.
•Port ID (outgoing port) — Indicates the neighboring device’s port from which
the CDP packet was sent.
•Version — Indicates the software version installed on the neighboring device.