Configuring Quality of Service
Defining Advanced QoS Mode
ESW 500 Series Switches Administration Guide 332
Edit QoS Aggregate Policer Page
The
Edit QoS Aggregate Policer Page
contains the following fields.
•Aggregate Policer Name— Specifies the Aggregate Policer Name
•Ingress Committed Information Rate (CIR) — Defines the CIR in Kbits per
second.
•Ingress Committed Burst Size (CbS) — Defines the CbS in bytes per second.
•Exceed Action — Action assigned to incoming packets exceeding the CIR.
Possible valu es are:
-
Drop
— Drops packets exceeding the defined CIR value.
-
Remark DSCP
— Remarks packet’s DSCP values exceeding the defined
CIR value.
-
None
— Forwards packets exceeding the defined CIR value.
STEP 3 Modify the relevant fields.
STEP4 Click Apply. QoS aggregate policer settings are modified, and the device is
updated.
Configuring Policy Table
In the
Policy Table Page,
QoS policies are set up and assigned to interfaces.
To set up QoS policies: