Cisco Systems ESW 500 - page 49

Getting Started
Using The Switch Console Port
ESW 500 Series Switches Administration Guide 49
STEP4 On the PC, launch a terminal emulation program such as HyperTerminal (bundled
with Windows) or Putty (freeware) and configure a new connection with the
following settings:
•Speed or Bits Per Second — 115200
•Data Bits — 8
•Stop Bit — 1
•Parity — None
•Flow Control — None
•Serial Port — Choose the appropriate serial or COM port on the PC that the
console cable is connected to
STEP 5 Save these settings and open a connection using the terminal emulation software.
If a blinking cursor appears, press Tab and enter the default username
cisco and
press Tab again and enter the default password
cisco . Press Enter to continue.
STEP 6 The switch main menu opens.
The System Configuration Menu line should be highlighted.
STEP 7 Press Enter. The page changes to System Configuration Menu.