Getting Started
Performing Common Configuration Tasks
ESW 500 Series Switches Administration Guide 47
NOTE If using CCA to launch the Switch Configuration Utility, right-click on switch
> Device Manager. Refresh the topology screen to get the latest IP address
for the switch.

Manual Reset

The Switch can be reset by inserting a pin or paper clip into the RESET opening.
Pressing the manual reset for 0 to 10 seconds reboots the switch. Pressing the
manual reset for longer than 10 seconds results in the switch being reset to
factory defaults.
Logging Off the Device
Click Logout at the top of the page. The system logs off. The

Switch Configuration

Utility

closes and the Log In page opens.