Cisco Systems ESW 500 - page 328

Configuring Quality of Service
Defining Advanced QoS Mode
ESW 500 Series Switches Administration Guide 328
- AND — Both the ACL 1 and the IP-based ACL 2 must match a packet.
- OR — Either the ACL 1 or the ACL 2 must match a packet.
•ACL 2 — Contains a list of the user-defined ACLs.
STEP 2 Click the Add button. The Add QoS Class Map Page opens:
Add QoS Class Map Page
The
Add QoS Class Map Page contains the following fields.
•Class Map Name — Defines a new Class Map name
•IP ACL — Matches packets to IP based ACLs first, then matches packets to
MAC based ACLs.
•Match — Criteria used to match IP addresses and /or MAC addresses with an
ACL’s address.The possible field values are:
- AND — Both the MAC-based and the IP-based ACL must match a
packet.
- O R — Either the MAC-based or the IP-based ACL must match a packet.
•MAC ACL — Matches packets to MAC based ACLs first, then matches packets
to IP based A CLs.
•Preferred ACL — Defines if packets are first matched to an IP based ACL or a
MAC based ACL. The possible field values are:
- IP Based ACLs — Matches packets to IP based ACLs first, then matches
packets to MAC based ACLs.