Cisco Systems ESW 500 - page 326

Configuring Quality of Service
Defining Advanced QoS Mode
ESW 500 Series Switches Administration Guide 326
STEP1 Click Quality of Service > Advanced Mode > DSCP Mapping. The DSCP Mapping
Page
opens:
DSCP Mapping Page
The
DSCP Mapping Page contains the following fields:
•DSCP In — Indicates the DSCP value in the incoming packet which will be
mapped to an outgoing packet.
•DSCP Out — Sets a mapped DSCP value in the outgoing packet for the
corresponding incoming packet.
STEP 2 Define the relevant mapping.
STEP 3 Click Apply. DSCP incoming values are mapped to DSCP outgoing values, and the
device is updated.