Managing Smart Ports
Configuring Smart ports for Servers
ESW 500 Series Switches Administration Guide 90
Smart ports Server Settings Page
The
Smart ports Server Settings Page
contains the following fields:
•Ports — Indicates the port to which Smart ports Wizard settings are applied.
•VLAN Port Mode — Indicates the VLAN port mode enabled on the port. The
value is:
-
Access
— Indicates the value is Access.
•Trunk Native VLAN ID — Indicates the VLAN to which the port belongs. The
default is VLAN 1 – the user can change this VLAN by selecting one of the
created VLANs via the drop down list.
•Port Securi ty Mode — Defines the locked port t ype. The field value is:
Dynamic
Lock
.
•Max MAC Addresses — Indicates the maximum number of MAC addresses
that can be learned on the port. A maximum of three MAC addresses can be
learned on the port.
•Port Securi ty Action — Indicates the action applied to packets arriving on a
locked port. The value is:
-
Discard
— Discards packets from any unlearned source. This is the
default value.
•Violation Trap Every — Indicates that traps are sent every 60 seconds.
•Broadcast Storm Control — Indicates the percentage of Broadcast Storm
Control enabled on the port. The value is 10% of the port speed.
•Spanning Tree Port Fast — Indicates Fast Link is enabled on the port. If Fast
Link mode is enabled for a port, the Port State is automatically placed in the