Configuring VLANs
Defining Protocol Groups
ESW 500 Series Switches Administration Guide 237
Add Protocol Group Page
The
Add Protocol Group Page
provides information for configuring new VLAN
protocol groups. The
Add Protocol Group Page
contains the following fields.
•Frame Type — Displays the packet type.
•Protocol Value — Defines the User-defined protocol value. The options are as
follows :
-
Protocol Value
— The possible values are IP, IPX, or ARP.
-
Ethernet-Based Protocol Value
— Specify the value in hexadecimal
format .
•Group ID — Defines the Protocol group ID to which the interface is added. The
possible value range is 1-2147483647 in hexadecimal format.
STEP 3 Define the relevant fields.
STEP4 Click Apply. The Protocol Group is added, and the device is updated.
Modifying Protocol Groups
The
Edit Protocol Group Page
provides information for configuring existing VLAN
protocol groups
STEP1 Click VLAN & Port Settings > VLAN Management > Protocol Group. The
Protocol
Group Page
opens:
STEP 2 Click the Edit Button. The
Edit Protocol Group Page
opens: