Configuring SNMP
Defining Trap Management
ESW 500 Series Switches Administration Guide 365
•Filter Name — Defines if the S N M P filter for which the SNMP Notification filter
is defined.
•Time out — Indicates the amount of time (seconds) the device waits before re-
sending informs. The default is 15 seconds.
•Retries — Indicates the amount of times the device re-sends an inform request.
The default is 3 attempts.
STEP 3 Define the relevant fields.
STEP4 Click Apply. The SNMP Notification Recipient settings are defined, and the device
is updated.
Modifying SNMP Notifications
The
Edit SNMP Notification Recipient Page
allows system administrators to define
notification settings. The
Edit SNMP Notification Recipient Page
is divided into four
areas, Notification Recipient, SNMPv1,2 Notification Recipient, SNMPv3
Notification Recipient and UDP Port Notification Recipient.
STEP1 Click Monitor & Device Properties > SNMP > Trap Management > Station
Management.
STEP 2 Click the Edit button. The
Edit SNMP Notification Recipient Page
opens: