Managing Device Information
TCAM Utilization
ESW 500 Series Switches Administration Guide 70
-

HTTP

— Specifies the Service Type selected is HTTP. This service is
enabled by default, and can be user-disabled but not deleted. The
service uses the default port 80. The port can be changed using the
menu CLI.
-

HTTPS

— Specifies the Service Type selected is secured HTTP. This
service is enabled by default, and can be user-disabled, but not deleted.
The service uses the default port 443. The port can be changed using
the menu CLI.
-

CiscoConfig

— Specifies the Service Type selected is CiscoConfig, the
Cisco Configuration Service. This service uses the default HTTP port 80.

CiscoConfig

is enabled by default.
STEP 2 Check Enable in the

Enable Bonjour

field to enable Bonjour on the device.
STEP 3 Check HTTP and/or HTTPS, and/or CiscoConfig in the Active Bonjour Services
field.
STEP4 Click Apply. Bonjour is enabled, and the device is updated.
TCAM Utilization
The
TCAM Utilization Page
display the availability of Ternary Content
Addressable Memory (TCAM) resources. TCA M is used for hig h-speed s earching
and performs security, QoS, and other types of applications. In contrast with
binary CAM, TCAM allows a third matching state of X or Don’t Care bits in data
searches. The first two bit types are 0 and 1, adding more flexibility to searches.
However, the need to encode three possible states instead of two also adds
greater resource costs.
The maximum number of rules that may be allocated by all applications on the
device is 1024. Some applications allocate rules upon their initiation. Additionally,
applications that initialize during system boot use some of their rules during the
startup process.
TCAM Allocation
To v i ew T CA M Re s o ur c es :