Cisco Systems OL-14619-01 Setup and Configuration, Firmware Updates, Serial Integrations, 6-27

Models: OL-14619-01

1 106
Download 106 pages 43.76 Kb
Page 83
Image 83
Setup and Configuration

Chapter 6 Integrating Cisco Unity with the Phone System

Integrating with Circuit-Switched Phone Systems by Using PIMG or TIMG Units

Figure 6-15

Phone system

Connections for an Integration by Using TIMG Units

Additional

slave TIMG units

as needed

Slave TIMG unit

(calls only)

 

LAN/WAN

 

Master TIMG unit

Cisco Unity

(SMDI data and calls)

server

 

 

 

T1 digital lines (one or more)

190676

 

RS-232 serial cable

 

 

 

Network connections

 

 

 

Setup and Configuration

For PIMG/TIMG setup and configuration, the installer does the following steps as documented in the applicable integration guide:

1.Configure the phone system.

2.Configure the PIMG/TIMG units. PIMG/TIMG settings are somewhat phone system-specific, but less so than phone system configuration.

3.Configure Cisco Unity for the integration.

For information on configuring the phone system, PIMG/TIMG units, and Cisco Unity, see the applicable Cisco Unity integration guide at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_and_configuration_g uides_list.html.

Firmware Updates

Note that when receiving shipment of PIMG or TIMG units, it may be necessary to update the firmware on the units. The PIMG/TIMG Admin interface provides a simple method to update the firmware files. Firmware updates are available on CCO (Cisco Connection Online). See the applicable integration guide or check for the latest firmware updates on the Cisco Unity PIMG page at http://www.cisco.com/cgi-bin/tablebuild.pl/unity-PIMG.

Serial Integrations

Cisco Unity supports the following serial protocols:

SMDI

MCI

MD-110

 

 

Design Guide for Cisco Unity Release 5.x

 

 

 

 

 

 

OL-14619-01

 

 

6-27

 

 

 

 

 

Page 83
Image 83
Cisco Systems OL-14619-01 manual Setup and Configuration, Firmware Updates, Serial Integrations, 6-27