Chapter 1 Product Overview
Front Panel
For more information on configuring interfaces, see the switch software configuration guide.
Table 1-2 | Supported Cisco SFP Modules |
| | |
Part Number | | Description |
| |
GLC-FE-100BX-D | 100BASE-BX10 |
GLC-FE-100BX-U | |
| |
GLC-FE-100EX | 100BASE-EX |
| |
GLC-FE-100FX | 100BASE-FX |
| |
GLC-FE-100LX | 100BASE-LX10 |
| |
GLC-FE-100ZX | 100BASE-ZX |
| | |
GLC-BX-D | | 1000BASE-BX10 |
GLC-BX-U | | |
| | |
GLC-LH-SM | | 1000BASE-LX/LH |
SFP-GE-L | | |
| | |
GLC-SX-MM | | 1000BASE-SX |
GLC-GE-S | | |
| | |
GLC-T1 | | 1000BASE-T and |
SFP-GE-T1 | | 10/100/1000BASE-T |
SFP-GE-ZX-SM | 1000BASE-ZX |
| |
CWDM-xxxx-SFP | CWDM |
| |
DWDM-xxxx-SFP | DWDM |
| | |
1.Supported on SFP-only ports, not supported on dual-purpose ports.
Note The Cisco ME 3400E-24TS-M does not support 1000BASE-T SFP modules.
For more information about SFP modules, see your SFP module documentation and the “Installing and Removing SFP Modules” section on page 2-19. For cable specifications, see Appendix B, “SFP Module Connectors.”
SFP Module Patch Cable
The switch supports the SFP-module patch cable, a 0.5-meter, copper, passive cable with SFP module connectors at each end (see Figure 1-4). The patch cable connects two switches in a cascaded configuration.
Figure 1-4 SFP-Module Patch Cable
126809
Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide
