5-19
Cisco ASDM User Guide
OL-16647-01
Chapter 5 Using the Startup Wizard
Startup Wizard Screens for the ASA 5505 Adaptive Security Appliance
Step 17 - Startup Wizard Summary
This screen summarizes all of the settings you have made for the security appliance.
• To change any of the settings in previous screens, click Back.
• If you started the Startup Wizard directly from a browser, when you click Finish, the configuration
that you created through the wizard is sent to the adaptive security appliance and saved in flash
memory automatically.
• If you ran the Startup Wizard from within ASDM, you must explicitly save the configuration in
Flash memory.
For More Information
See the Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide and the Cisco ASA
5505 Getting Started Guide.
Modes
The following table shows the modes in which this feature is available:
Other Interfaces Configuration
This screen lets you configure the remaining interfaces.
Fields
• Interface—Displays the network interface on which the original host or network resides.
• Name—Displays the name of the interface being configured.
• Security Level—Displays the security level range for the interface from 0 to 100, with 100 assigned
to the inside interface and 0 assigned to the outside interface. Perimeter interfaces can use any
number between 1 and 99. Security levels between 0 and 100 for perimeter interfaces are not set by
default.
• Enable traffic between two or more interfaces with same security levels—Check this check box to
assign the same security level to two or more interfaces, and enable traffic between them.
• Enable traffic between two or more hosts connected to the same interface—Check this check box if
you have an interface between two or more hosts and want to enable traffic between them.
• Edit—Click to change the configuration of the interface in the Edit Interface dialog box.
For More Information
See the Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—