Cisco Systems OL-16647-01 Add/Edit Message ID Filter

24-119
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Inspect Map Field Descriptions
– Criterion—Shows the criterion of the inspection.
– Value—Shows the value to match in the inspection.
– Action—Shows the action if the match condition is met.
– Log—Shows the log state.
– Add—Opens the Add Message ID Filtering dialog box to add a message ID filter.
– Edit—Opens the Edit Message ID Filtering dialog box to edit a message ID filter.
– Delete—Deletes a message ID filter.
– Move Up—Moves an entry up in the list.
– Move Down—Moves an entry down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Message ID Filter
The Add Message ID Filter dialog box lets you configure message ID filters.
Fields
• Match Type—Specifies whether traffic should match or not match the values.
For example, if No Match is selected on the string “example.com,” then any traffic that contains
“example.com” is excluded from the class map.
• Criterion—Specifies which criterion of SCCP (Skinny) traffic to match.
– Message ID—Match specified message ID.
Message ID—Specify value of maximum SCCP message ID allowed.
– Message ID Range—Match specified message ID range.
Lower Message ID—Specify lower value of SCCP message ID allowed.
Upper Message ID—Specify upper value of SCCP message ID allowed.
• Action—Drop packet.
• Log—Enable or disable.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—