6-14
Cisco ASDM User Guide
OL-16647-01
Chapter 6 Configuring Basic Device Settings
System Software
–
Client Revision—Specifies the revision number(s) of the software component.
Double-clicking any of the rows in the Client Images table opens the Edit Client Update Entry
dialog box, in which you can modify the client parameters. These changes are immediately reflected
in the table, but you must click Apply to save them to the configuration.
• Live Client Update area—Lets you immediately update Auto Update clients that are currently
connected to the security appliance through a tunnel.
–
Tunnel Group—Select “all” to update all Auto Update clients connected over all tunnel groups,
or specify a tunnel group for clients that you want to update.
–
Update Now—Click to begin an immediate update.
Note Live Client Update is only available when the security appliance is configured in routed mode.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Client Update
Fields
The Add/Edit Client Update dialog box displays the following fields:
• Device Identification group:
–
Device ID—Enable if the client is configured to identify itself with a unique string, and specify
the same string that the client uses. The maximum length is 63 characters.
–
Device Family—Enable if the client is configured to identify itself by device family, and specify
the same device family that the client uses. It can be asa, pix, or a text string with a maximum
length of 7 characters.
–
Device Type—Enable if the client is configured to identify itself by device type, and specify the
same device type that the client uses. It can be pix-515, pix-515e, pix-525, pix-535, asa5505,
asa5510, asa5520, or asa5540. It can also be a text string with a maximum length of 15
characters.
–
Not Specified—Select for clients that do not match the above.
• Image Type—Specifies an image type, either ASDM or boot image. This URL must point to a file
appropriate for this client. Maximum length of 255 characters.
• Client Revision—Specifies a text string corresponding to the revision number(s) of the software
component. For example: 7.1(0)22.
• Image URL—Specifies the URL for the software component. This URL must point to a file
appropriate for this client.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • •——