Chapter 1 Important Safety and Compliance Information
Regulatory Compliance Notes and Notices
European Notice
Products with the CE marking comply with the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European norms:
•EN55022: Radio Frequency Interference
•EN55024: Electromagnetic Immunity of Information Technology Equipment
•
•
•EN55013: Radio disturbance characteristics of broadcast receivers and associated equipment
•EN55020: Electromagnetic immunity of broadcast receivers and associated equipment
European Class A Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case you may be required to take adequate measures.
UK—Wiring the Mains: Power Supply Plug
Before disconnecting the power supply plug from the mains, contact Cisco or a
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
The wires in the mains lead are coloured in accordance with the following code:
•Blue is neutral.
•Brown is live.
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:
•The wire coloured blue must be connected to the terminal marked with the letter N or coloured blue or black.
•The wire coloured brown must be connected to the terminal marked with the letter L or coloured brown or red.
Warning Do not connect either wire to the earth terminal, which is marked with the letter E, or by the Earth symbol, or is coloured green, or is coloured green and yellow.
| User Guide for Cisco LCD Professional Series Displays |
