Chapter 1 Important Safety and Compliance Information
About Batteries
Cleaning the Power Plug and the Electrical Outlet Safely
Disconnect the power cord and use the soft fabric cleaning cloth that shipped with your LCD display.
•To prevent electric shock, fire, and malfunctions that might occur as a result of improper cleaning:
–Never moisten the cloth when you clean the power plug pins or dust the power outlet. Always use the cloth dry.
–Never spray water directly onto the main body of your LCD display. Ensure that water does not enter your LCD display and that it is not wet.
•To prevent changes in the appearance of the product surface and peeling of stickers from its surface from cleaning, never not any formulation that contains wax, acetone, benzene, alcohol, paint thinner, or any other flammable or corrosive substance.
About Batteries
Note Product kits that shipped before April 2, 2009 include AAA batteries for your remote control. After this date, the product kit no longer includes these batteries, which are sold separately.
The remote control for your LCD display uses batteries. In your community there might be environmental and safety regulations that require you to dispose of these batteries properly. To learn how these requirements affect you, contact your local authorities.
Store batteries and all other accessories in a location where they are safely out of the reach of children.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or overheat batteries.
There is a danger of explosion if you use the wrong type of batteries. Replace batteries only with the same type (or its equivalent) that you received from Cisco.
Regulatory Compliance Notes and Notices
Your LCD display is marked to indicate its compliance with standards set forth by the prevailing regulatory agencies in multiple regions, including but not limited to these:
•
•
•
•
•
•Republic of
•
•
•
•
User Guide for Cisco LCD Professional Series Displays
|
| ||
|
|
