Cisco Systems OL-7822-06 quick start Setup Command Parameters, Definition

Chapter 4 Connect the Management Interfaces and Perform Initial System Configuration

Perform the Initial System Configuration

Setup Command Parameters

Table 4-1	Setup Command Parameters
Parameter		Definition
IP address		IP address of the SCE 1000.
subnet mask		Subnet mask of the SCE 1000.
default gateway		Default gateway.
hostname		Character string used to identify the SCE 1000.
		Maximum 20 characters.
admin password		Admin level password.
		Character string from 4-100 characters beginning
		with an alpha character.
root password		Root level password.
		Character string from 4-100 characters beginning
		with an alpha character.
password encryption status		Enable or disable password encryption?
Time Settings
time zone name and offset		Standard time zone abbreviation and minutes
		offset from UTC.
local time and date		Current local time and date. Use the format:
		00:00:00 1 January 2002
SNTP Configuration
broadcast client status		Set the status of the SNTP broadcast client.
		If enabled, the SCE will synchronize its local time
		with updates received from SNTP broadcast
		servers.
unicast query interval		Interval in seconds between unicast requests for
		update (64 – 1024)
unicast server IP address		IP address of the SNTP unicast server.
DNS Configuration
DNS lookup status		Enable or disable IP DNS-based hostname
		translation.
default domain name		Default domain name to be used for completing
		unqualified host names
IP address		IP address of domain name server. ( maximum of
		3 servers)
TCP port number		TCP port number of the RDR-formatter
		destination
Access Control Lists

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

4-4 OL-7822-06