Cisco Systems OL-7822-06 Mount the System to the Rack, Attach the Crossrail Supports to the Rack

Chapter 2 Rack-Mount the SCE 1000

Mount the System to the Rack

Figure 2-5 Assembling the Slider Brackets

1 2 3

92777

Step 2 Make sure that they are oriented so that both crossrails will support the SCE 1000 when they are attached to the rack.

Attach the Crossrail Supports to the Rack

Step 1 Align the crossrail supports with the side of the rack, parallel to the floor.

Figure 2-6 Attaching the Crossrails to the Rack

123

92778

Step 2 Insert and tighten two screws to the front posts or mounting strips of the rack

Step 3 Insert and tighten two screws to the Back posts of the rack.

Step 4 Repeat steps 2 and 3 on the other side of the rack, keeping the brackets flush against the posts and parallel to the supporting bracket on first side of the rack.

Mount the System to the Rack

When the appropriate mounting brackets are securely installed, the SCE 1000 can be installed into the rack.

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

2-4 OL-7822-06