Cisco Systems OL-7822-06 quick start 8 Securing the SCE Platform to the Rack

Chapter 2 Rack-Mount the SCE 1000

Mount the System to the Rack

A rack with both front and back posts will have the crossrail supports installed. Slide the SCE 1000 onto these crossrails and push it all the way back.

Step 4 While keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the rack or mounting strip.

Figure 2-8 Securing the SCE Platform to the Rack

1 2 3

MNG 1	MNG 2
LINK/ 10/100/	LINK/ 10/100/
ACTIVE 1000
	ACTIVE 1000

CONSOLE

AUX

PWR A PWR B STATUS BYPASS

LINK RX		TX		LINK RX
						TX
RX	MM	TX
				RX	MM
						TX
	SUB		GBE-1
			LINE
					NET

Cisco SCE 1000 2xGBE

Series

210420

Step 5 For each bracket, insert and tighten two appropriate screws to the rack.

Note Since the brackets support the weight of the entire SCE 1000 chassis, be sure to use all four screws to fasten the two rack-mount brackets to the rack posts.

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

2-6 OL-7822-06