Cisco Systems OL-7822-06 quick start Workbench or Tabletop Installation, Tools and Parts

Chapter 1 Prepare for Installation

Workbench or Tabletop Installation

Tools and Parts

Use the following list of tools and parts as a checklist for preparing for installing the SCE 1000 platform:

•Appropriate cables to connect the SCE 1000 to the network and console terminal

•Tape measure (optional)

•Level (optional)

•Number 1 Phillips screwdriver

•Number 2 Phillips screwdriver

•1/4-inch flat-blade screwdriver

•1/4-inch hex wrench

•Grounding kit (shipped with the SCE 1000)

•12 AWG or 2.5 mm copper installation wire with hex or loop connectors for DC power leads (DC power only) Ring terminals must be UL approved and suitable for 12 AWG wire.

•AC power cords (AC power only, shipped with SCE 1000)

•Rack-mounting kit (shipped with SCE 1000)

–Spare screws for changing bracket position

Prepare for Rack-Mount Installation

Before you begin the rack-mounting tasks, determine the type of rack—four-post or two-post—that you will be using.

Workbench or Tabletop Installation

Figure 1-1

Tabletop Installation of the SCE 1000 Platform

Cis

co SC

E 10

00 Series

E

2xGB

BYPASS

LINK RX TX

PWR A PWR

B STATUS

LINK RX

TX

RX

MM

TX

RX MM

TX

GBE-1

NET

LINE

CONSOLE

AUX

SUB

MNG 2

MNG 1

ALCITNIKV/E1010/10000/

ALCITNIKV/E1010/10000/

1

2

92967

For a workbench or tabletop installation, verify the following before installing the SCE 1000 platform:

•The SCE 1000 platform is off the floor and has adequate ventilation.

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

1-2 OL-7822-06