Cisco Systems OL-7822-06 quick start Viewing the User Log Counters, Example

SCE 1000numbershow logger device user-file-log counters counters:

Total info messages: 1

Total warning messages: 0

Total error messages: 0

Total fatal messages: 0

The following example shows the current User-File-Log device counters.

If there are “Total error messages” or “Total fatal messages”, use the show logger device User-File-Log command to display details about the errors.

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE platform operation and configuration. This configuration, referred to as the running-config , is saved in the SCE platform volatile memory and is effective while the SCE platform is up. After reboot, the SCE platform loads the startup-config , which includes the non-default configuration as saved by the user, into the

running-config.

The SCE platform provides commands for:

• Viewing the running configuration

• Viewing the startup configuration

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

Logger device User-File-Log

operation-status

Chapter 6 Completing the Installation

Viewing Configuration

Step 1 To display the operation status of the system, at the SCE 1000# prompt, type show system and press press Enter.

A message displaying the operation status of the system appears. If the system is operating in order, the following message appears:

System Operation status is Operational.

Example:

The following example displays a sample output where the LEDs appear red/orange:

SCE 1000numbershow system operation-statusSystem Operation status is Operational

Viewing the User Log Counters

View the user log for errors that occurred during the installation process.

To display the user log device counters, complete the following steps:

Step 1 At the SCE 1000# prompt, type show logger device User-File-Log counters and press press Enter.

EXAMPLE:

6-2 OL-7822-06