Cisco Systems OL-7822-06 Summary Steps, Detailed Steps, 7 Sliding the SCE Platform into the Rack

Chapter 2 Rack-Mount the SCE 1000

Mount the System to the Rack

SUMMARY STEPS

1.Make sure that the rack brakes are locked or that the rack is otherwise stabilized.

2.Position the SCE 1000 so that the front end is closest to you, and lift it carefully to place it into the rack. To prevent injury, avoid sudden twists or moves.

3.Slide the SCE 1000 into the rack, pushing it back until the brackets (installed at the front of the SCE 1000) meet the mounting strips or posts on both sides of the rack.

4.While keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the rack or mounting strip.

5.For each bracket, insert and tighten two appropriate screws to the rack.

DETAILED STEPS

Step 1 Make sure that the rack brakes are locked or that the rack is otherwise stabilized.

Figure 2-7 Sliding the SCE Platform into the Rack

MNG 1	MNG 2
ALINK/ 10/100/	LINK/ 10/100/
CTIVE 1000
	ACTIVE 1000

CONSOLE

AUX

PWR A PWR B STATUS BYPASS

LINK RX		TX		LINK RX
						TX
RX	MM	TX
				RX	MM
						TX
	SUB		GBE-1
			LINE
					NET

Cisco	1000
SCE
2xGBE

Series

210419

1 2 3

Step 2 Position the SCE 1000 so that the front end is closest to you, and lift it carefully to place it into the rack. To prevent injury, avoid sudden twists or moves.

Step 3 Slide the SCE 1000 into the rack, pushing it back until the brackets (installed at the front of the SCE 1000) meet the mounting strips or posts on both sides of the rack.

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

OL-7822-06 2-5