Cisco Systems OL-7822-06 quick start Examples

Chapter 6 Completing the Installation

Saving the Configuration Settings

The configuration file holds all information that is different from the system default in a file called config.txt located in the directory: tffs0:system.

Examples

EXAMPLE 1:

The following example shows the running configuration file.

SCE 1000numbershow running-config#This is a general configuration file (running-config). #Created on 15:50:56 CET MON February 11 2006

#cli-type 1 #version 1

clock timezone CET 1 snmp-server community “public” ro

snmp-server host 10.1.1.253 traps version 1 “public” interface LineCard 0

connection-mode active no silent

no shutdown

flow-aging default-timeout UDP 60 interface FastEthernet 0/0

ip address 10.1.5.109 255.255.0.0 interface FastEthernet 0/1 interface FastEthernet 0/2

exit

line vty 0 4 no timeout exit

SCE 1000#

SCE 1000#copy running-config startup-config

Writing general configuration file to temporary location...

Backing-up general configuration file...

Copy temporary file to final location...

SCE 1000number

For backup purposes, the old startup-config file is saved under the directory: tffs0:system/prevconf. To remove a configuration command from the running-config, use the no form of the command.

EXAMPLE 2:

The following example illustrates how to remove all DNS settings from the running configuration.

SCE 1000(config)#no ip name-server

SCE 1000(config)#

Cisco Service Control Engine 1000 2xGBE Quick Start Guide

6-4 OL-7822-06