Cisco Systems PA-4T manual Guides

Installing a Port Adapter

Figure 6-4 Aligning the Single-Width Port Adapter Between the Slot Guides

Guides

5
I	EN

RCVR

XMTR	RCLK FERF RL
	AIS OOF LL

FE 0 /

22132

Step 7 With the port adapter halfway in the slot, connect all required cables to the port adapter.

Step 8 After connecting all required cables, carefully slide the port adapter all the way into the slot until the port adapter is seated in the router.

Step 9 After seating the port adapter in the router, slide the locking tab to the locked position and tighten the screws. (Figure 6-1 and Figure 6-2 show the locking tab in the locked position.)

This completes the procedure for installing a new port adapter in a Cisco 7100 series router. Proceed to Chapter 8, “Configuring the PA-4T+ Interfaces,” to connect the necessary cables to your port adapter.

6-4PA-4T+ Synchronous Serial Port Adapter Installation and Configuration