Cisco Systems PA-4T manual Document Organization, Related Documentation

Document Organization

Document Organization

This document is organized into the following chapters:

Section	Title	Description
Chapter 1	Overview	Describes the PA-4T+ port adapter, illustrates their
		location in the supported hardware platforms, and
		describes its LED displays, cables, and receptacles.
Chapter 2	Preparing for Installation	Describes safety considerations, tools required, and
		procedures you should perform before the actual
		installation.
Chapter 3	VIP2 and the	Provides instructions for installing the PA-4T+ port
	PA-4T+ Port Adapter	adapter on a VIP2 interface processor installed in a
		Cisco 7500 or Cisco 7000 series router.
Chapter 4	Cisco 7200 Series and the	Provides instructions for installing the PA-4T+ port
	PA-4T+ Port Adapter	adapter in a Cisco 7200 series router.
Chapter 5	Cisco uBR7200 Series and the	Provides instructions for installing the PA-4T+ port
	PA-4T+ Port Adapter	adapter in a Cisco uBR7200 series universal
		broadband router.
Chapter 6	Cisco 7100 Series and the	Provides instructions for installing the PA-4T+ port
	PA-4T+ Port Adapter	adapter in Cisco 7100 series routers.
Chapter 7	Installing the PA-4T+ Interface	Provides instructions for installing port adapter
	Cables	cables on the supported platforms.
Chapter 8	Configuring the PA-4T+	Provides instructions for configuring your port
	Interfaces	adapter on the supported platforms. The instructions
		given in this chapter apply to all supported platforms
		described in this document.

Related Documentation

Your router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:

•For Cisco IOS software configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.

Note You can access Cisco IOS software configuration and hardware installation and maintenance documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

•For hardware installation and maintenance information on the Cisco 7000 series and Cisco 7500 series routers, and the VIP2, refer to the following publications:

—The installation and configuration guide that shipped with your Cisco 7000 series or Cisco 7500 series router

—Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (for VIP2 users only)

viPA-4T+ Synchronous Serial Port Adapter Installation and Configuration