3-13
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version. 3.0
Chapter3 Setting Up the Cisco Secure ACS HTML Interface Protocol Configuration Options for RADIUS
Note Each selected IETF RADIUS attribute must be supported by all network
devices using RADIUS.
To set protocol configuration options for (IETF) RADIUS attributes, follo w these
steps:
Step 1 Click Interface Configuration.
Step 2 Click RADIUS (IETF).
Result: The RADIUS (IETF) page appears.
Step 3 For each IETF RADIUS attribute that you want to appear as a configurable option
on the User Setup or Group Setup page, select the corresponding check box.
Note Each attribute selected must be supported by your RADIUS network
devices.
Note Attributes marked “*” are sent from the AAA client to the RADIUS
server and hence cannot be configured in the RADIUS setup screens.
Step 4 To specify how many values to display for tagged attributes on the User Setup and
Group Setup pages, select the Tags to Display Per Attribute option, and then
select a value from the corresponding list. Examples of tagged attributes are
[064] Tunnel-Type and [069]Tunnel-Password.
Step 5 When you have finished selecting the attributes, click Submit at the bottom of the
page.
Result: Each IETF RADIUS attribute that you selected appears as a configurable
option on the User Setup or Group Setup page, as applicable.