Chapter3 Settin g Up the CiscoSecure ACS HTML Interface
Protocol Configuration Options for RADIUS
3-10
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version. 3.0
Result: The TACACS+ (Cisco) page of the Interface Configuration section
appears.
Step 3 In the TACACS+ Services table, select the check box for each TACACS+ service
you want displayed on the applicable setup page.
Step 4 To add new services and protocols, follow these steps:
a. In the New Services section of the TACACS+ Services table, type in any
Service and Protocol to be added.
b. Select the appropriate check box to select those that should be displayed for
configuration either under User Setup, or Group Setup, or both.
Step 5 In the Advanced Configurations Options section, select the check boxes of the
display options you want to enable.
Step 6 When you have finished setting TACACS+ interface display options, click
Submit.
Result: The selections made in this procedure determine what TA CACS+ options
Cisco Secure ACS displays in other sections of the HTML interface.
Protocol Configuration Options for RADIUS
This section details the configuration of the Cisco Secure ACS HTML interface
for RADIUS settings. The interface settings enable you to display or hide various
RADIUS administrative and accounting options. You can simplify the HTML
interface by hiding the features that you do not use.
Provided that you have the corresponding AAA clients configured, the User
Interface section displays the following RADIUS protocol configuration
selections:
•(IETF) RADIUS Settings—This page lists all attributes available for (IETF)
RADIUS.
These standard (IETF) RADIUS attributes are available for any network
device configuration when using RADIUS. If you want to use IETF attribute
number 26, the vendor-specific attribute (VSA), select Interface
Configuration and then RADIUS for the vendors whose network devices you