Chapter8 E stablishing CiscoSecure ACS System Configuration
CiscoSecure Database Replication
8-22
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Step 8 To specify the secondary Cisco Secure ACS servers for the primary
Cisco Secure ACS server, follow these steps:
Note For more information about replication partners, see the “Replication
Partners Options” section on page 8-15.
a. In the Replication Partners table, from the AAA Servers list, select the name
of a secondary Cisco Secure ACS server to which you want the primary
Cisco Secure ACS server to send its selected replication components.
Note The secondary Cisco Secure ACS servers available in the AAA
Servers list is determined by the AAA Servers table in Network
Configuration. For more information about the AAA Servers
table, see the “AAA Server Configuration” section on page 4-15.
b. Click —> (right arrow button).
Result: The selected secondary Cisco Secure ACS server moves to the
Replication list.
c. Repeat Steps a and b for each secondary Cisco Secure ACS server to which
you want the primary Cisco Secure ACS server to send its selected
replication components.
d. If you move more than one secondary Cisco Secure ACS server to the
Replication list, assign the order in which the primary Cisco Sec ure ACS
replicates to them. Click Up and Down to move selected Cisco Secure ACS
servers in the Replication list until you have created the order you want.
Step 9 Click Submit.
Result: Cisco Secure ACS saves the replication configuration you created.